How to set up TP Link Deco X55 AX3000 at your home?
Learn ways you can complete the tp link deco x55 ax3000 setup conveniently
A network solution such as the TP-Link router is nothing more than having all the power at your fingertips. Important is to know the steps you can complete the setup process so that it can perform flawlessly. This blog will discuss the tp-link deco x55 ax3000 mesh wifi 6 system setup steps so you can get started with internet access in no time.
Accessing the TP-Link Deco account login Page
In addition to discussing the steps you need to follow for tp link deco x55 ax3000 installation, this blog also discusses ways of configuring the router settings to make it perform even better. The process for tp link deco x55 setup begins when you have the necessary hardware. The following are some things you’ll need to get started:
Two Ethernet cables
A Modem
TP-Link Router Device
A smartphone or computer system
The basic steps for TP Link Deco X55 Pro Setup
Once you have all your items within reach, you can begin with connecting your DSL/Internet cable to your MODEM device.
- Utilize an Ethernet cable in order to link your MODEM directly to your router. Also, connect the router to your computer system by using an additional Ethernet cable.
- Connect the power adapters both to the MODEM and router. Now, turn on the devices.
- Let the tp link x55 setup’s LEDs switch from blinking green to solid. After that, head to your computer and start a browser that you like.
- Within the Address Bar enter 192.168.1.1 and then press Enter. Enter Key. This will take users to the tplinkdeco net login page.
Tip: This page can be accessed via the URL http://tplinkwifi.net. If you aren’t in a position to access this tplinkwifi.net account page to login, you may use an IP address.
- Once the tp-link deco account login page displays on the screen, you'll need to enter your default credentials for tplinklogin in the appropriate fields.
Tip: Username for most routers from TP-Link is admin, while the Password field is completely blank. If you’ve got separate tp link deco x55 ax3000 login credentials for the router, you can see them on the bottom of the panel or in the router’s user manual. Make use of the same tp link deco x55 ax3000 default password and username to fill in the fields that correspond to yours. You can now follow the simple steps to complete the tp link x55 setup process.
After entering the credentials when you enter them, the browser will direct you to the primary page of the tp link deco ax3000 wifi 6 mesh system deco x55 setup wizard.
Editing the network settings
- Since you're using a MODEM and a WAN connection, change the type of WAN connection. Follow the steps below to do it:
- When you arrive on the tp link deco wired setup wizard, click Network and then click the WAN menu located on the left.
- On the WAN connection type menu, switch the option to PPPoE.
- In the PPPoE Connection menu that is shown below, enter your username and password supplied to you from your ISP.
- Once you have entered the information, click on the Save button you see in the bottom of the page. This will facilitate the internet connection.
Tip: If you do not have the details, you can contact your internet service provider for the same.
- Give it a minute or so and then verify the status of your connection using the Status Tab. If the WAN section shows certain values in the subnet mask, IP gateway, server and IP fields, you are connected to an active internet connection.
If tp link deco x55 ax3000 not connecting to internet, you might require power cycling the device. For this follow these steps:
- Switch off your DSL MODEM and then turn off your router and finally, your computer. You can leave them on for approximately 2 minutes.
- Turn off the MODEM DSL and wait for it to start getting ready. When it is ready, switch on the router and the computer system too.
When you’re trying to find the IP address from your ISP, and are facing tp link deco x55 ax3000 not working issue, there’s an easy method to complete the tp link deco x55 ax3000 setup with ease.
Once the setup process is complete, connect the devices to the network and start using the internet.
Is your tp link deco x55 ax3000 not working? Contact us now!
If you’re trying to finish the tp link deco setup without app, as a novice you’re likely to encounter problems. Issues like:
- Tp link deco x55 ax3000 not connecting to internet,
- Tp link deco x55 ax3000 reset password
- Tp link deco x55 ax3000 not working
- Unable to setup tp link deco x55 router
and more, can be eliminated in a breeze, with our help.
Troubleshooting issues with tp-link deco x55 ax3000 mesh wifi 6 system setup
tp-link deco account login not working
If you’re unable to connect to the tp link deco x55 ax3000 login page, there are two possible reasons. Your internet connection isn’t active or your computer is not connected to the TP-Link Deco’s local network.
In these instances, ensure you’re connecting to the network of TP-Link. If you’re already connected in this situation, follow these steps:
- It is possible that the page has been saved in cache. Try clearing caches and browser history. Alternately attempt to open the page using an alternative browser.
- Utilise your default address 192.168.0.1 or 192.168.1.1 to sign in as opposed to using the address tplinkwifi.net. It is also possible to connect your device to the computer directly with the Ethernet cable.
TP Link Deco X55 setup guide - firmware update
The latest firmware loaded and installed to your router’s firmware is essential to have reliable internet speeds. This is not just important for speed, but also for security of information. If you’d like to guard your information from being exposed online, implementing the most current firmware upgrade is essential. If you are concerned that your tp link x55 setup isn’t functioning well, here are some steps to follow:
- Visit the website of TP-Link and download the latest firmware that is compatible with your router’s model.
- This can be done by visiting the download centre and selecting the correct option from the drop-down list and selecting the appropriate hardware version. Then, click the Firmware option and the available firmware updates will appear.
- You’ll have to remove firmware files from the ZIP file.
- Log into the tp link Quick setup wizard on the internet.
- Navigate to your System Tools menu, and then click on the option for Firmware Upgrade.
- Select the Browse or Choose File option to locate the firmware file that has been extracted and select Open.
- Once the file is uploaded, click on the Upgrade button. Your deco router will now reboot automatically.
- Click on the Status button to see if the firmware version is upgraded or not.
Performing tp link deco router reset
If you’re having problems related to the tp link deco x55 ax3000 installation, or tp-link deco account login, or some other hardware, your first choice is to reset the device. If you still face issues after following the basic troubleshooting steps, you can try the following troubleshooting steps:
- Find the RESET button on the rear panel. Use a thin object to hold and press that.
- Hold the button for around 10 seconds, until the lights on your front panel begin to flash altogether.
- Press the RESET button, then let the router restart itself to its factory default settings.
- Continue the setup process using the quick wizard for setting up.
